Fast and accurate CT dose measurements
The Piranha CT X-ray QA meter measures and presents all parameters instantly and simultaneously. It measures kVp, Time, Total Filtration, CTDI parameters, dose length product, and presents Waveform.
Several important parameters can also be measured such as CTDI100, CTDIw, CTDIvol, DLP, FWHM, Geometric efficiency, and tube current variations. Choose your Piranha CT with CT Dose Profiler or Ion chamber.
Piranha CT – general specifications
| Size | 133 x 75 x 26 mm |
| Weight | Approx. 400 g |
| Display | PC or Windows Tablet |
| Software | Ocean Next™ software for X-ray QA |
| Database support | Yes |
| Interface type | Built-in Bluetooth and USB |
| Detector Position Check | Yes |
| Simultaneous Dose Measurements | Yes – up to two detectors simultaneously |
| Use of Dose Detector with Active AEC | Yes – RTI Dose Probe or RTI T20 |
| Bluetooth range | 100 m free-in-air |
| USB cables | Included |
| Power source | Rechargeable Li ion battery / Ext. power supply |
| Battery life | Approx. 15 hours |
| Battery tested | According to UN 38.3 |
| No. of exposures needed for measurement | One |
| Min. exposure time | 0.1 ms |
| Memory | Unlimited |
| Operating temperature | 15 °c – 35 °c |
| Storage temperature | -10 °c – +50°c |
| Waveform Sampling rate | 4 – 2000 samples/s |
| Waveform recording time | 1024 ms – 524 s |
| Backscatter Protection | Yes – main unit, RTI Dose Probe, and RTI T20 |
| Warranty | Two years |
| Extended Warranty | Up to ten years |
| Calibration Cycle | Two years |
| Standard | Complies with relevant parts of the standards IEC 61674 and IEC 61676 for Dosimetric instruments |
| EMC Tested | According to IEC 61326-1:2012 |
| PTB Approval | DE-17-M-PTB-0070 |